Capturing Sodera Analyzed Data to Disk

Note: Record is not available in Viewer mode. Analyze/Analyzing is available in Viewer mode, allowing different analyses to be performed on previously recorded and saved captures.

1. Click the Record button on the Standard Toolbar. Sodera will begin capturing data from all wireless devices within range and from all connected wired devices.
2. In the Wireless Devices and Wired Devices pane select the active devices for analysis
3. Click on Analyze button , or click the Start Analyze button  to begin capturing to a file.  This Start Analyze button is located on the Control window, Event Display, and Frame Display.
4. Files are placed in My Capture Files by default and have a .cfa extension. Choose Directories from the Options menu on the Control window to change the default file location.
5. Watch the Status Bar on the Control window to monitor how full the file is. When the file is full, it begins to wrap, which means the oldest data will be overwritten by new data.  

6. Click the Analyzing button, or click the Stop Analyze button to stop analyzing. .  

7. To clear captured data, click the Clear icon .

   • If you select Clear after stopping analysis, a dialog appears asking whether you want to save the data.  
     • You can click Save File and enter a file name when prompted .  
     • If you choose Do Not Save, all data will be cleared.
     • If you choose Cancel, the dialog closes with no changes.
   • If you select the Clear icon while a capture is occurring:
     • The capture stops.
     • A dialog appears asking if you want to save the capture
     • You can select Yes and save the capture or select No and close the dialog.  In either case, the existing capture file is cleared and a new capture file is started.
     • If you choose Cancel, the dialog closes with no changes.

---

Also see these related topics...